JVC SP-EXA10 Cassette Player User Manual


 
19
Presetting radio stations in the receiver allows you
to easily tune in to a radio station.
Presetting radio stations
You can store up to 30 FM radio stations and up to
15 AM radio stations.
1 Select a radio station you want
to store (A “Selecting a radio
station” on page 18).
2 Press MEMORY.
The preset number flashes in the display
window on the receiver for about 5
seconds.
3 While the preset number is
flashing, press PRESET or
PRESET
to select the preset
number you want to use.
You can also select the preset number by
using the number buttons. (Refer to “Using
the number buttons”. (A page 15))
4 Press MEMORY or ENTER while
the selected number is flashing.
“STORED” will appear and the selected
radio station will be stored.
NOTE
When you store a radio station to a preset number
to which another radio station has previously been
stored, the newly set radio station replaces the
previously stored radio station.
Tuning in to a preset radio station
1 Slide the remote control
mode selector to
RECEIVER.
2 Press FM/AM repeatedly to
select “FM” or “AM”.
3 Press the number buttons to
select the preset number of the
radio station to which you want
to tune in.
Refer to “Using the number buttons”
(A page 15).
Tuning in to a preset
radio station
Listening to radio broadcasts (continued)
For the locations of the remote
control buttons, refer to page 18.
EXA10[J_C_UJ]-03.fm Page 19 Tuesday, September 6, 2005 6:32 PM