Filter
Top Products
22
BUTTON
SURROUND MODE
(On the remote control)
BUTTON
SURROUND ON/OFF* DSP MODE
(On the front panel)
MODE SURROUND ON THEATER LIVE CLUB DANCE CLUB HALL PAVILION
DSP OFF
(SURROUND OFF)
ANALOG ⅜
⅜⅜ ⅜⅜⅜ ⅜
(2 CH) (DOLBY PRO LOGIC)
LINEAR PCM
⅜
⅜⅜ ⅜⅜⅜ ⅜
(DOLBY PRO LOGIC)
DOLBY DIGITAL
⅜ *
1
ןן ןןן ⅜
(DOLBY DIGITAL)
DTS
⅜ *
2
ןן ןןן ⅜
(DTS SURROUND)
Available DSP modes according to the input mode
* You can also use SURROUND on the remote control to activate the surround mode.
⅜: Possible ן: Impossible
DAP modes
In order to reproduce a more acoustic sound field in your listening
room while playing soundtracks of stereo sources, you can use DAP
modes. This mode can be used when the front speakers and the
rear speakers are connected to this receiver (without respect to
the center speaker connection).
You can select one of the following to your preference.
LIVE CLUB: Gives the feeling of a live music club with a low
ceiling.
DANCE CLUB: Gives a throbbing bass beat.
HALL: Gives clear vocal and the feeling of a concert hall.
PAVILION: Gives the spacious feeling of a pavilion with a
high ceiling.
Reproducing the Sound Field
The sound heard in a concert hall or club consists of direct sound
and indirect sound — early reflections and reflections from behind.
Direct sounds reach the listener directly without any reflection. On
the other hand, indirect sounds are delayed by the distances of the
ceiling and walls. These direct sounds and indirect sounds are the
most important elements of the acoustic surround effects.
JVC Theater Surround and DAP modes can create these important
elements, and give you a real “being there” feeling.
Reflections from
behind
Early reflections
Direct sounds
INPUT
*
1
When 2 channel signal comes in, DOLBY PRO LOGIC is selected. When other signals come in, DOLBY DIGITAL is selected.
*
2
When 2 channel signal comes in, DOLBY PRO LOGIC is selected. When other signals come in, DTS SURROUND is selected.
EN21-27.RX-6010&6012R[B]_f 01.1.9, 5:57 PM22