JVC LVT2099-029A Home Theater System User Manual


 
28
Using HDMI IN jacks
You can enjoy the pictures and sound of your
component with the HDMI OUT jack.
1. Connect the HDMI OUT jack of your component
into the HDMI IN 1 or 2 jack on the rear panel of
this unit.
2. Press
1/' to turn the power on.
3. Press INPUT to select
[HDMI IN 1] or [HDMI IN 2]
option.
4. Press AUDIO VOL. (-) to turn down the volume
of this unit.
5. Turn your component on.
6. Use AUDIO VOL. (+/-) to adjust the volume of this
unit.
Note:
You cannot change the video resolution at the
HDMI IN 1/2 mode.
Change the video resolution of the connected
component.
The setting of the sound mode is not available
when Dolby Digital Plus, Dolby TrueHD and
DTS-HD are played at HDMI IN 1/2 mode.
If the video output signal is abnormal when your
personal computer is connected to HDMI IN 1/2
jack, change the resolution of your personal
computer to 480p, 720p, 1080i or 1080p.
Using DIGITAL AUDIO IN jacks
You can enjoy the sound of your component with the
digital optical or coaxial output jack from the
speakers of the system.
1. Connect the optical or coaxial output jack
of your component into the OPTICAL or
COAXIAL (DIGITAL AUDIO IN) jack on the
rear panel of this unit.
2. Press
1/' to turn the power on.
3. Press INPUT to select [OPTICAL] or [COAXIAL]
option.
4. Press AUDIO VOL. (-) to turn down the volume
of this unit.
5. Turn your component on.
6. Use AUDIO VOL. (+/-) to adjust the volume.
To the HDMI OUT jack of your component
(set-top box, digital satellite receiver, video game machine, etc.)
To the digital optical output jack of your component
To the digital coaxial output jack of your component
or