Filter
Top Products
19
Installation and
Setup
HDMI OUT connection
• For the 480i resolution setting, real output
resolution of HDMI OUT will change to 480p.
• If you select a resolution manually and then
connect the HDMI jack to TV and your TV does
not accept it, the resolution setting is set to [Auto].
• If you select a resolution that your TV does not
accept, the warning message will appear. After
resolution change, if you cannot see the screen,
please wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
• The 1080p video output frame rate may be
automatically set to either 24Hz or 60Hz
depending both on the capability and preference
of the connected TV and based on the native
video frame rate of the content on the BD-ROM
disc. (Refer to “1080p Display Mode” on page 22.)
COMPONENT VIDEO OUT connection
• For the 720p, 1080i, 1080p resolution setting with
protected media, real output resolution of COM-
PONENT VIDEO OUT will be outputted at 480p
resolution.
• Even if the resolution is set to 1080p, non-copy
protected BDs and DVDs playback are outputted
at 1080i resolution.
• BD or DVD video stream could prevent up-scaling
on analogue output.
VIDEO OUT connection
• The resolution of the VIDEO OUT jack is always
outputted at 480i resolution.