Filter
Top Products
15
Installation and
Setup
Connections to Your TV
Make one of the following connections, depending
on the capabilities of your existing equipment.
Tips:
z
Depending on your TV and other equipment you
wish to connect, there are various ways you
could connect the player. Use only one of the
connections described below.
z
Please refer to the manuals of your TV or other
devices as necessary to make the best connec-
tions.
Caution
– Make sure the player is connected directly to the
TV. Tune the TV to the correct video input
channel.
– Do not connect your player via your VCR. The
image could be distorted by the copy protection
system.
Component Video Connection
Connect the COMPONENT VIDEO OUT jacks on
the player to the corresponding input jacks on the
TV using Y Pb Pr cables (C). You can hear the
sound through the system’s speakers.
Tip:
When you use COMPONENT VIDEO OUT connec-
tion, you can change the resolution for the output.
(Refer to “Resolution setting” on page 18.)
Video Connection
Connect the VIDEO OUT jack on the player to the
video in jack on the TV using a video cable (V).
You can hear the sound through the system’s speak-
ers.
VIDEO
INPUT
Pr
Pb
Y
COMPONENT VIDEO INPUT
C
V
Installation and Setup
Rear of the player
Rear of TV