JVC LVT2099-029A Home Theater System User Manual


 
24
[LOCK] Menu (Parental Control)
The [LOCK] settings affect only BD and DVD play-
back.
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password and
press ENTER. Enter it again and press ENTER to
verify.
Password
You can create, change or delete the password.
[New] – Enter a 4-digit password and press
ENTER. Enter it again and press ENTER to cre-
ate a new password.
[Change] – Enter the current password and
press ENTER.
Enter a 4-digit password and press ENTER.
Enter it again and press ENTER to create a new
password.
[Delete] – Enter the 4-digit password and press
ENTER to delete the password.
Tip:
If you make a mistake before pressing ENTER,
press CLEAR. Then input the correct password.
If you forget your password
If you forget your password, you can clear it using
the following steps:
1 Remove any disc that might be in the player.
2 Highlight [Password] in the [LOCK] option.
3 Use Number buttons to enter “210499”. The
password is cleared.
DVD Rating
Blocks playback of rated disc based on their con-
tent. (Not all discs are rated.)
[Rating 1-8] – Rating one (1) has the most
restrictions and rating eight (8) is the least
restrictive.
[Unlock] – If you select unlock, parental control
is not active and the disc plays in full.
BD Rating
Set an age limit of BD-ROM play. Use number but-
tons to input an age limit for BD-ROM viewing.
[255] – All BD-ROM can be played.
[0-254] – Prohibits play of BD-ROM with
corresponding ratings recorded on them.
Notes:
The [BD rating] will be applied only for the BD disc
that containing the Advanced Rating Control.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 42.