Filter
Top Products
5
English
Connecting the subwoofer speaker
You can enhance the bass by connecting a subwoofer.
Connect the input jack of a powered subwoofer to the
SUBWOOFER OUT jack on the rear panel, using a cable with RCA
pin plugs.
Powered subwoofer
SUBWOOFER
OUT
Connecting Audio/Video Components
You can connect the following audio/video components to this
receiver using cables with RCA pin plugs (not supplied). Refer also
to the manuals supplied with your components.
Audio component connections
Use the cables with RCA pin plugs (not supplied).
Connect the white plug to the audio left jack, and the red plug to the
audio right jack.
CAUTION:
If you connect a sound-enhancing device such as a graphic equalizer
between the source components and this receiver, the sound output
through this receiver may be distorted.
Cassette deck or MD recorder
CD player
Turntable
CD player
AUDIO
PHONO
TAPE/MDCD
TV
SOUND
OUT
(REC)
IN
(PLAY)
L
R
To audio output
To audio input
To audio input
MD recorder
Cassette deck
To audio output
To audio output
AUDIO
PHONO
TAPE/MDCD
TV
SOUND
OUT
(REC)
IN
(PLAY)
L
R
Note:
You can connect either a cassette deck or an MD recorder to the
TAPE/MD jacks. When connecting an MD recorder to the TAPE/MD
jacks, change the source name, which will be shown on the display
when selected as the source, to “MD.” See page 11 for details.
AUDIO
PHONO
TAPE/MDCD
TV
SOUND
OUT
(REC)
IN
(PLAY)
L
R
TV
TV (as the sound source)
To audio output
If your audio components have a COMPU LINK-3 or
TEXT COMPU LINK terminal
• See also page 25 for detailed information about the connection and
the COMPU LINK-3 remote control system.
• See also page 26 for detailed information about the connection and
the TEXT COMPU LINK remote control system.
ANTENNA
AM
EXT
AM
LOOP
FM 75
COAXIAL
AUDIO
PHONO
TAPE/MDCD
TV
SOUND
OUT
(REC)
IN
(PLAY)
L
R
If an earth cable is
provided for your
turntable, connect the
cable to the ground
terminal (H) of the
ANTENNA terminals on
the rear panel.
To audio output
Turntable
Note:
Any turntables incorporating a small-output cartridge such as an MC
(moving-coil type) must be connected to this receiver through a
commercial head amplifier or step-up transformer. Direct connection
may result in insufficient volume.
EN01-07.RX-669PGD[UB]/f 99.2.2, 1:17 PM5