JVC LVT0142-006A Stereo Receiver User Manual


 
23
English
Adjusting the DVD MULTI Playback Mode
(Also see page 20)
1. Press ON SCREEN SET.
2, 8, 4, and 6 buttons on the 10 keys work as % / / @ / # for
ON SCREEN operations.
2. Press any one of % / / @ / #.
The MAIN MENU appears on the TV.
3. Press % / to move to “SOURCE.”
4. Press @ / # to select “DVD MULTI.”
5. Press % / to move
to “SOUND
CONTROL,” then press @ / #.
The SOUND CONTROL menu appears.
6. Press % / to move
to “SURROUND
LEVEL,” then press
@ / #.
The SURROUND LEVEL
menu appears.
7. Press % / to move to the item you want to
set or adjust, then press @ / #.
On this adjustment menus, you can do the following:
“CENTER LEVEL”: Adjust the center speaker output level.
“REAR L LEVEL”: Adjust the left rear speaker output
level.
“REAR R LEVEL”: Adjust the right rear speaker output
level.
8. When you finish, press ON SCREEN EXIT
repeatedly until the menu disappears from the
TV.
Adjusting the Tone (Also see page 10)
1. Press ON SCREEN SET.
2, 8, 4, and 6 buttons on the 10 keys work as % / / @ / # for
ON SCREEN operations.
2. Press any one of % / / @ / #.
The MAIN MENU appears on the TV.
3. Press % / to move to “SOUND
CONTROL,” then press @ / #.
The SOUND CONTROL menu appears.
4. Press % / to move
to “TONE
CONTROL,” then
press @ / #.
The TONE CONTROL menu
appears.
5. Press % / / @ / # to adjust the tone as you
want.
@ / # : Select the frequency ranges — 100 Hz (bass) and
10 kHz (treble).
% / : Adjust the frequency levels.
6. When you finish, press ON SCREEN EXIT
repeatedly until the menu disappears from the
TV.
Setting the Basic Setting Items (Also see
pages 11 and 12)
1. Press ON SCREEN SET.
2, 8, 4, and 6 buttons on the 10 keys work as % / / @ / # for
ON SCREEN operations.
2. Press any one of % / / @ / #.
The MAIN MENU appears on the TV.
3. Press % / to move
to “SETTING,” then
press @ / #.
The SETTING menu appears.
4. Press % / to move to the item you want to
set or adjust, then press @ / #.
On the SETTING menu, you can do the following:
“CENTER SPK”: Select an appropriate center speaker size.
“REAR SPK”: Set the rear speaker information.
“DELAY TIME”: Select an appropriate delay time. *
Note:
*
Only valid for “PRO LOGIC.” Not displayed when “REAR SPK”
is set to “NO.”
5. When you finish, press ON SCREEN EXIT
repeatedly until the menu disappears from the
TV.
EN21_34.RX-669PGD[UB]/f 99.2.2, 1:39 PM23