Filter
Top Products
29
English
Search a disc by its genre:
1. Press TEXT DISPLAY while “CD” is selected as
the source.
The Disc Information screen appears on the TV.
2. Press % / fi to move
to “SEARCH,”
then press ON
SCREEN SET.
The DISC SEARCH screen
appears.
3. Press % / fi to move
to “GENRE”, then
press ON SCREEN
SET.
The GENRE SEARCH
screen appears.
4. Press % / fi to move to the genre you want to
search, then press ON SCREEN SET.
To show the unseen genres, press % / fi until they appear.
Disc search starts, then the
SEARCH RESULT screen,
showing the disc titles,
appears.
5. On the SEARCH
RESULT screen, you
can do the following:
• Changing the indication of the disc information: Press % /
fi to move
to a searched disc, then press @ / #. Each
time you press @ / #, the disc information alternates
between its disc title and its performer.
• Going to the Disc Information screen (see page 27): Press
% / fi to move to a searched disc, then press ON
SCREEN SET.
• Showing unseen disc information (if more than 5 discs are
listed as a result of the search): Press % / fi until they
appear.
• Going back to the GENRE SEARCH screen: Press ON
SCREEN EXIT.
Entering the Disc Information
For the CD Player with the disc memory function:
You can use the disc memory function through this receiver.
The disc information (its performer, disc title, and music genre) of
normal audio CDs will be stored into the memory built in the CD
player.
For the disc memory function, refer to the manual supplied with your
CD player.
• The performer, disc title, and music genre information are usually
recorded in a CD Text. However, if a CD Text has no genre
information recorded in the disc itself, you can input its music
genre by yourself.
Note:
You can enter the TITLE INPUT screens for a CD Text and input its
titles. However, you cannot store the titles you have input for a CD
Text.
Example: Entering the following information for Disc 1
Performer: “MICHEAL”
Disc title: “MY FAVORITE”
1. Press TEXT DISPLAY while “CD” is selected as
the source.
The Disc Information screen appears on the TV.
2. Press % / fi to move
to “TITLE INPUT,”
then press ON SCREEN
SET.
The TITLE INPUT:
PERFORMER screen appears.
3. Press % / fi / @ / # to move in front of a
character you want, then press ON SCREEN SET
to enter the character.
• If the current CD is a CD Text, go to step 5 without entering the
performer.
To use the lower case letters, press % / fi / @ / # to move
to , then press ON SCREEN SET.
To use the upper case letters again, press % / fi / @ / # to
move to , then press ON SCREEN SET.
EN21_34.RX-669PGD[UB]/f 99.2.2, 1:39 PM29