JVC KD-DB711 CD Player User Manual


 
28
ENGLISH
More about this receiver
Basic operations
Turning on the power
• By pressing SOURCE on the receiver, you
can also turn on the power.
Turning off the power
• If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
Selecting the sources
• When no disc is loaded in the receiver, “CD”
cannot be selected.
Radio operations
Storing stations in memory
• During SSM search...
– All previously stored stations are erased and
stations are stored newly.
– Received stations are preset in No. 1 (lowest
frequency) to No. 6 (highest frequency).
– When SSM is over, the station stored in
No. 1 will be automatically tuned in.
• When storing a station manually, a previously
preset station is erased when a new station is
stored in the same preset number.
FM RDS operations
• If you want to know more about RDS, visit
«http://www.rds.org.uk».
• Network-Tracking Reception requires two
types of RDS signals—PI (Programme
Identification) and AF (Alternative
Frequency) to work correctly. Without
receiving these data correctly, Network-
Tracking Reception will not operate.
• If a Traffic Announcement is received, the
volume level (TA Volume) automatically
changes to the preset level.
• If Alternative Frequency Reception for DAB
services (DAB AF) is activated, Network-
Tracking Reception (AF-REG) is also
activated automatically. On the other hand,
Network-Tracking Reception cannot be
deactivated without deactivating Alternative
Frequency Reception.
DAB tuner operations
General
• Only primary DAB services can be presetted
even you store a secondary service.
• A previously preset DAB service is erased
when a new DAB service is stored in the
same preset number.
• “NO TEXT” will be shown for the service
without DLS if you press and hold DISP.
EN27-33_KD-DB711[EX]f.indd 28EN27-33_KD-DB711[EX]f.indd 28 1/12/05 4:14:29 PM1/12/05 4:14:29 PM