Filter
Top Products
26
ENGLISH
Main elements and features
1 (standby/on attenuator) button
• Turns on and off the power and also
attenuates the sound.
2 SRC (source) button
• Selects the source.
3 R (reverse) / F (forward) buttons
• Searches for stations or DAB services if
pressed briefly.
• Searches for ensembles if pressed and
held.
• Fast-forwards or reverses the track if
pressed and held.
• Changes the tracks of the disc.
4 SOUND button
• Selects the sound mode (C-EQ: custom
equalizer).
5 U (up) / D (down) buttons
• U (up): Changes the FM/AM/DAB bands.
• D (down): Changes the preset stations or
DAB services.
• Changes the folder of the MP3/WMA
discs.
6 VOLUME +/– buttons
• Adjusts the volume level.
The receiver is equipped with the steering
wheel remote control function.
• See the Installation/Connection Manual
(separate volume) for connection.
This receiver can be remotely controlled as
instructed here (with an optionally purchased
remote controller). We recommend that you use
remote controller RM-RK60 with your receiver.
• When operating, aim the remote controller
directly at the remote sensor on the
receiver. Make sure there is no obstacle in
between.
Installing the lithium coin battery
(CR2025)
Warning:
• Store the battery in a place where children
cannot reach to avoid risk of accident.
• To prevent the battery from over-heating,
cracking, or starting a fire:
– Do not recharge, short, disassemble, or
heat the battery or dispose of it in a fire.
– Do not leave the battery with other
metallic materials.
– Do not poke the battery with tweezers or
similar tools.
– Wrap the battery with tape and insulate
when throwing away or saving it.
Caution on remote sensor:
Remote sensor
• DO NOT expose the remote sensor to
strong light (direct sunlight or artificial
lighting).
Using the remote controller — RM-RK60
EN20-26_KD-DB711[EX]f.indd 26EN20-26_KD-DB711[EX]f.indd 26 1/12/05 4:13:19 PM1/12/05 4:13:19 PM