Filter
Top Products
26
-EN
Specifications
Inputs: 5 lines (S-VIDEO, VIDEO, AUDIO L/R) x 3,
(Component, S-VIDEO, AUDIO L/R) x 2
Outputs: 2 lines (S-VIDEO, VIDEO, AUDIO L/R) x 2
Monitor outputs: 2 lines (S-VIDEO, VIDEO, AUDIO L/R) x 1,
(Component, S-VIDEO, AUDIO L/R) x 1
Audio monitor output: 1 line (AUDIO L/R) x 1
OPTICAL output: 1 line (AUDIO)
Reference level
• Composite signal Vp-p = 1.0 V (75 Ω)
• Component signals
Y: Vp-p = 1.0 V (75 Ω)
Cb/Pb: Vp-p = 0.7 V (75 Ω)
Cr/Pr: Vp-p = 0.7 V (75 Ω)
Maximum input
• Composite signal Vp-p = 1.5 V (75 Ω)
• Component signals
Y: Vp-p = 1.5 V (75 Ω)
Cb/Pb: Vp-p = 1.0 V (75 Ω)
Cr/Pr: Vp-p = 1.0 V (75 Ω)
• Composite signal Vp-p = 1.0 V (75 Ω)
• Component signals
Y: Vp-p = 1.0 V (75 Ω)
Cb/Pb: Vp-p = 0.7 V (75 Ω)
Cr/Pr: Vp-p = 0.7 V (75 Ω)
50 dB or more (45 dB or more between Y/C in the same channel)
50 dB or more
Composite signal: 12 MHz, Component signals: 30 MHz
Reference level: –10 dBV (47 kΩ)
Maximum level: +6 dBV (1 kHz, 1% distortion)
–10 dBV (with reference input, 1 kHz)
80 dB or more (1 kHz)
80 dB or more
5 Hz to 50 kHz
Less than 0.03% (with reference input, 1 kHz)
Peak emission wavelength : 660 nm ± 30 nm
Peak output power : –15 dBm to –21 dBm
(at the output end of the reference optical fiber cable)
AC 120 V `, 60 Hz
13 W (2.0 W in Standby mode)
(W) 435 mm x (H) 84 mm x (D) 256 mm (including knobs, jacks, and feet)
(17-3/16" x 3-5/16" x 10-1/8")
2.8 k˝ (6.2 lbs)
Remote control unit (RM-AJ555), "AA" (R6/UM-3) battery x 2 (for operation testing)
Input/output terminals
Video inputs
Video outputs
(Reference level)
Video crosstalk
Video S/N ratio
Video frequency response
Audio inputs
Audio outputs
Audio crosstalk
Audio S/N ratio
Audio frequency response
Distortion
Digital audio (OPTICAL)
Power requirements
Power consumption
Dimensions
Main body weight
Accessories
Design and specifications subject to change without notice.
Product name
AV selector