Filter
Top Products
30
Using the On-Screen Menus
You can use the Menus on the TV screen to control the receiver.
To use this function, you need to connect the TV to the MONITOR OUT jack on the rear panel (see page 7), and set the
TV’s input mode to the proper position to which the receiver is connected.
• When the TV’s input mode is incorrect; for example, a different video input or TV tuner mode is selected, you
cannot show the Menus on the TV screen.
On-Screen Operation buttons (on the remote control)
Selecting Different Sources for Picture and
Sound (Also see page 11)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move
to “VISUAL.”
3. Press @ / # to select a
different video source.
4. When you finish, press EXIT.
The menu disappears from the TV.
Activating the DSP Modes (Also see page 27)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move
to “MODE.”
3. Press @ / # to select the
DSP mode you want to
use.
4. When you finish, press EXIT.
The menu disappears from the TV.
Selecting the Analog or Digital Input Mode
(Also see page 16)
This selection is only possible when the digital input (DIGITAL IN)
terminal setting have been correctly done for the digital source
currently selected.
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move
to “INPUT.”
3. Press @ / # to select the
digital or analog input
you want.
For details, see page 16.
4. When you finish, press EXIT.
The menu disappears from the TV.
Selecting the Source to Play (Also see page 10)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
Notes:
• “INPUT” appears only when the digital input (DIGITAL IN)
terminal setting have been correctly done for the digital source
currently selected. (See page 16.)
• The on-screen display will disappear if no operation is done for
about 1 minute.
2. Press % / fi to move to “SOURCE.”
3. Press @ / # to select the source.
4. When you finish, press EXIT.
The menu disappears from the TV.
Shows the buttons you
can use on the current
menu.
In this case, use % / fi to
move
up and down,
and @ / # to select,
adjust or set the item.
RM-SRX7000J REMOTE CONTROL
CONTROL
CHANNEL VOLUMETV VOL
TUNING
STOP PAUSE
FF/
/REW
VCR
TV/VIDEO
TAPE/MD
MUTING
REC
PLAY
DOWN UP
AUDIOTV
CATV/DBS
VCR
DVD DVD MUILTI CD TAPE/MD
TV/DBS PHONO FM/AM
VCR
ANALOG/DIGITAL
SURROUND
CENTER
SURROUND
TEST REAR-L
CD-DISC
MODE
ON/OFF
EFFECT REAR-R
SOUND
SEA MODE
SUBWOOFER
RETURN FM MODE
SET
MENU
AUDI O/
TV/VCR
EXIT
TEXT
DISPLAY
SLEEP
123
456
7
/P
89
10
0
+10
100+
CATV/DBS
MENUMENU
ENTERENTER
SET
MENU
EXIT
EN30_40.RX-7000V[J]/f 00.1.12, 11:58 AM30