Filter
Top Products
35
To change the transmittable signals for
operating a CATV converter or satellite tuner
1. Press and hold CATV/SAT POWER.
2. Press CATV CONTROL.
3. Enter manufacturer’s code (two digits) using
buttons 1–9, and 0.
See the list below to find the code.
Examples: For a PIONEER product, press 1, then 3.
For a SONY product, press 2, then 0.
4. Release CATV/SAT POWER.
Following button can be used for operating the CATV converter
or the satellite tuner:
CATV/SAT POWER Turns on and off the CATV converter
or satellite tuner.
After pressing CATV CONTROL, you can perform the
following operations on the equipment:
CH +/– Changes the channels.
1 – 9, 0, 100+ (+10) Selects the channel.
100+ (+10) button will function as the
ENTER button if your equipment
requires pressing ENTER after
selecting a channel number.
RETURN Alternates between previously
selected channel and the current
channel.
Note:
Refer to the manual supplied with your CATV converter or satellite
tuner.
5. Try to operate your CATV converter or satellite
tuner by pressing CATV/SAT POWER.
When your CATV converter or satellite tuner turns on or off,
you have entered the correct code.
If there are more than one code listed for your brand of
CATV converter or satellite tuner, try each one until the
correct one is entered.
To change the transmittable signals for operating
another manufacturer’s VCR
1. Press and hold VCR POWER.
2. Press VCR.
3. Enter manufacturer’s code (two digits) using
buttons 1–9, and 0.
See the list below to find the code.
Examples: For a JVC product, press 0, then 1.
For a FUNAI product, press 1, then 0.
4. Release VCR POWER.
Following button can be used for operating the VCR:
VCR POWER Turns on and off the VCR.
After pressing VCR, you can perform the
following operations on the VCR:
CH +/– Changes the TV channels on the VCR.
3 Starts playback.
1 Rewinds a video tape.
¡ Fast winds a video tape.
7 Stops operation.
8 Pauses. To resume playing, press 3.
REC PAUSE: Pauses recording temporarily.
Note:
Refer to the manual supplied with your VCR.
5. Try to operate your VCR by pressing VCR POWER.
When your VCR turns on or off, you have entered the correct code.
If there are more than one code listed for your brand of VCR,
try each one until the correct one is entered.
Manufacturer Codes Manufacturer Codes
EMERSON 11 RCA 05, 06
FUNAI 10, 14, 15, 16 SAMSUNG 24
GOLD STAR 12 SANYO 21, 22, 23
HITACHI 04 SHARP 27, 28, 29
JVC 01, 02, 03 SONY 18, 19, 20
MITSUBISHI 13 SHINTOM 30
NEC 25 TOSHIBA 26
PANASONIC 07, 17 ZENITH 08
PHILIPS 09
Manufacturers’ codes are subject to change without notice. If they
are changed, this remote control cannot operate the equipment.
Manufacturer Codes
GI JERROLD 01, 02, 03, 04, 05,
06, 07, 08
HAMLIN/REGAL 15, 16, 17, 18
PIONEER 13, 14
SCIENTIFIC ATRANTA 09, 10
ZENITH 11, 12
RCA 19
SONY 20
Manufacturers’ codes are subject to change without
notice. If they are changed, this remote control cannot
operate the equipment.
EN30_38.RX-668V[J]/f 99.1.16, 2:09 PM35