Filter
Top Products
22
4. Press % / fi to move
to “INPUT ATT.”
5. Press @ / # to turn the
Input Attenuator mode
“ATT ON” or
“NORMAL.”
6. When you finish, press OSD EXIT repeatedly
until the menu disappears from the TV.
Adjusting the DSP Modes
(Also see pages 17 – 19)
1. Press OSD SET.
2, 8, 4, and 6 buttons on the 10 keys work as % / fi / @ / # for
OSD operations.
2. Press any one of % / fi / @ / #.
The MAIN MENU appears on the TV.
3. Press % / fi to move to “MODE.”
4. Press @ / # to select the
DSP mode you want to
adjust.
• In this example,
“THEATER” is selected.
5. Press % / fi to move
to “SOUND
CONTROL,” then
press @ / #.
The SOUND CONTROL
menu appears.
6. Press % / fi to move
to “SURROUND
LEVEL,” then press
@ / #.
The SURROUND LEVEL
menu appears.
7. Press % / fi to move to the item you want to
set or adjust, then press @ / #.
On these adjustment menus, you can do the following:
For 3D-PHONIC (3D ACTION, 3D THEATER):
“DSP EFFECT”: Select the effect level.
For DAP
(LIVE CLUB, DANCE CLUB, HALL, PAVILION):
“REAR LEVEL”: Adjust the rear speaker output
level.*
“DSP EFFECT”: Select the effect level.
For Dolby Pro Logic:
“TEST TONE”: Output a test tone.
“CENTER LEVEL”: Adjust the center speaker output
level.**
“REAR LEVEL”: Adjust the rear speaker output
level.*
For JVC Theater Surround:
“TEST TONE”: Output a test tone.
“CENTER LEVEL”: Adjust the center speaker output
level. **
“REAR LEVEL”: Adjust the rear speaker output
level.
“DSP EFFECT”: Select the effect level.
Notes:
* Not displayed when “REAR SPK” is set to “NO” (see page 11).
** Not displayed when “CENTER SPK” is set to “NONE” (see
page 11).
8. When you finish, press OSD EXIT repeatedly
until the menu disappears from the TV.
Adjusting the DVD MULTI Playback Mode
(Also see page 20)
1. Press OSD SET.
2, 8, 4, and 6 buttons on the 10 keys work as % / fi / @ / # for
OSD operations.
2. Press any one of % / fi / @ / #.
The MAIN MENU appears on the TV.
3. Press % / fi to move to “SOURCE.”
4. Press @ / # to select “DVD MULTI.”
5. Press % / fi to move
to “SOUND
CONTROL,” then press @ / #.
The SOUND CONTROL menu appears.
6. Press % / fi to move
to “SURROUND
LEVEL,” then press
@ / #.
The SURROUND LEVEL
menu appears.
7. Press % / fi to move to the item you want to
set or adjust, then press @ / #.
On this adjustment menus, you can do the following:
“CENTER LEVEL”: Adjust the center speaker output level.
“REAR L LEVEL”: Adjust the left rear speaker output
level.
“REAR R LEVEL”: Adjust the right rear speaker output
level.
8. When you finish, press OSD EXIT repeatedly
until the menu disappears from the TV.
EN21_29.RX-668V[J]/f 99.1.16, 2:08 PM22