Filter
Top Products
23
Operating the Tuner (Also see pages 13 and 14)
1. Press OSD SET.
2, 8, 4, and 6 buttons on the 10 keys work as % / fi / @ / # for
OSD operations.
2. Press any one of % / fi / @ / #.
The MAIN MENU appears on the TV.
3. Press % / fi to move
to “TUNER
CONTROL,” then
press @ / #.
The TUNER CONTROL menu
appears.
4. Press % / fi to move to the item you want to
set or adjust, then press @ / #.
On the TUNER CONTROL menu, you can do the following:
“PRESET CH”: Select a preset channel station.
“BAND”: Select the band.
“FREQUENCY”: Tune in a station manually.
“FM MODE”: Select the FM reception mode.*
“PRESET MEMORY”: See “Storing the Preset Stations”
below.
Note:
* Not displayed when an AM station is selected.
5. When you finish, press OSD EXIT repeatedly
until the menu disappears from the TV.
Storing the Preset Stations (Also see page 13)
1. Press OSD SET.
2, 8, 4, and 6 buttons on the 10 keys work as % / fi / @ / # for
OSD operations.
2. Press any one of % / fi / @ / #.
The MAIN MENU appears on the TV.
3. Press % / fi to move to “TUNER
CONTROL,” then press @ / #.
The TUNER CONTROL menu appears.
4. Tune into a station on the TUNER CONTROL
menu, referring to “Operating the Tuner” above.
5. Press % / fi to move
to “PRESET
MEMORY,” then press
@ / #.
The PRESET MEMORY menu
appears.
6. Press @ / # to select a
preset station number
you want.
7. Press OSD SET to store
the setting.
8. When you finish, press OSD EXIT repeatedly
until the menu disappears from the TV.
Adjusting the Tone (Also see page 10)
1. Press OSD SET.
2, 8, 4, and 6 buttons on the 10 keys work as % / fi / @ / # for
OSD operations.
2. Press any one of % / fi / @ / #.
The MAIN MENU appears on the TV.
3. Press % / fi to move to “SOUND
CONTROL,” then press @ / #.
The SOUND CONTROL menu appears.
4. Press % / fi to move
to “TONE
CONTROL,” then
press @ / #.
The TONE CONTROL menu
appears.
5. Press % / fi / @ / # to adjust the tone as you
want.
@ / # : Select the frequency ranges — 100 Hz (bass) and
10 kHz (treble).
% / fi : Adjust the frequency levels.
6. When you finish, press OSD EXIT repeatedly
until the menu disappears from the TV.
Setting the Basic Setting Items (Also see
pages 11 and 12)
1. Press OSD SET.
2, 8, 4, and 6 buttons on the 10 keys work as % / fi / @ / # for
OSD operations.
2. Press any one of % / fi / @ / #.
The MAIN MENU appears on the TV.
3. Press % / fi to move
to “SETTING,” then
press @ / #.
The SETTING menu appears.
4. Press % / fi to move to the item you want to
set or adjust, then press @ / #.
On the SETTING menu, you can do the following:
“CENTER SPK”: Select an appropriate center speaker size.
“REAR SPK”: Set the rear speaker information.
“DELAY TIME”: Select an appropriate delay time. *
Note:
* Only valid for “PRO LOGIC.” Not displayed when “REAR SPK”
is set to “NO.”
5. When you finish, press OSD EXIT repeatedly
until the menu disappears from the TV.
EN21_29.RX-668V[J]/f 99.1.16, 2:08 PM23