Filter
Top Products
45
To change the setting
1
Display the PARENTAL LOCK sub menu.
• Follow steps
1
to
4
of “To set Parental Lock” .
“PASSWORD” is automatically selected.
• You cannot select any item other than “EXIT” until you
enter the correct password.
2
Enter your password.
• If you enter a wrong password, “– – – –” appears again.
• If you enter a wrong password three times, “EXIT” is
automatically selected. In this case, press ENTER to
exit from the PARENTAL LOCK submenu.
• If you forget your password, enter “8888.”
3
Change the settings.
• Follow steps
5
to
8
of “To set Parental Lock” .
4
Enter your password again.
• If you want to change a password, enter a new four digit
number in this step.
To release Parental Lock temporarily
When you set a strict rating level, some discs may not be
played back at all. When you try to play such a disc, the
following screen appears on the TV screen.
1
Select “TEMPORARY RELEASE,” then ENTER.
• If you do not play back such a disc, select “NOT
RELEASE,” then ENTER. Then eject the disc.
2
Enter your password.
• If you enter a wrong password three times, “NOT
RELEASE” is automatically selected. In this case, press
ENTER. Then eject the disc.
BR
NONE
_ _ _ _
PARENTAL LOCK
COUNTRY CODE
EXIT
SET LEVEL
PASSWORD
PASSWORD? ••• PRESS 0 ~ 9 KEY
TO EXIT, PRESS [SET UP].
ENTER
SELECT
“PASSWORD” is
automatically
selected.
_ _ _ _
PARENTAL LOCK
TEMPORARY RELEASE
NOT RELEASE
PASSWORD
USE
5∞
TO SELECT. USE ENTER TO CONFIRM.
ENTER
SELECT
MX-JD5[A].book Page 45 Wednesday,June 30, 2004 11:11 AM