Filter
Top Products
42
7
SPK. SETTING Set up Menu
You can adjust the sound settings of the System.
LEVEL
Select this to enter the LEVEL submenu.
If the output sound of center speaker or surround speakers
from the listening position are not equal to that of the front
speakers, use test tone to adjust the output level to get the
best possible surround effect.
• When adjusting the output level by using the test tone, take
the disc out from the disc tray.
1 Select “ON” of the item TEST TONE.
2 Select the speaker—CENTER SPEAKER,
SURROUND RIGHT SPEAKER, SURROUND
LEFT SPEAKER.
3 Adjust the speaker output level for the selected
speaker.
You can adjust the output level within the range of –6 dB
to +6 dB in 1 dB interval.
4 Repeat steps 2 and 3 to adjust the other speakers.
• To stop test tone, select “OFF” of the item TEST
TONE.
5 Select “RETURN” then press ENTER to return to the
SPK. SETTING Set up menu.
DISTANCE
Select this to enter the DISTANCE submenu.
See also “Setting the Speakers” on page 8.
SPK. SETTING
DISTANCE
LEVEL
ENTER
SELECT
USE TO SELECT. USE ENTER TO CONFIRM
TO EXIT, PRESS [SET UP].
Speaker Diagram
Front Speakers
Center Speaker
Surround Speakers
• The selected speaker icon is highlighted blue.
0dB
0dB
0dB
LEVEL
SURROUND RIGHT SPEAKER
CENTER SPEAKER
OFF
USE TO SELECT. USE ENTER TO CONFIRM
TO EXIT, PRESS
[
SET UP
]
.
ENTER
SELECT
TEST TONE
RETURN
SURROUND LEFT SPEAKER
0dB
FRONT SPEAKER,
CENTER SPEAKER,
SURROUND SPEAKER
:
For each speaker, set the
distance from the listening
point within the range of 0.3 m
to 9.0 m in 0.3 m intervals.
RETURN
:
Select this then press ENTER
to return to the SPK. SETTING
menu.
3. 0m
3. 0m
0dB
DISTANCE
CENTER SPEAKER
FRONT SPEAKER
USE TO SELECT. USE ENTER TO CONFIRM
TO EXIT, PRESS
[
SET UP
]
.
ENTER
SELECT
RETURN
SURROUND SPEAKER
3. 0m
MX-JD5[A].book Page 42 Wednesday,June 30, 2004 11:11 AM