Filter
Top Products
1716
ENGLISH
HOW TO USE THE FUNCTION
MIN
P
O
W
E
R
/
C
H
A
R
G
E
W
O
W
O
F
F
SUR
ROU
ND
LEVEL
M
AX
T
r
u
B
a
s
s
OFF
OFF : Normal mode
TruBass: Setting that emphasizes the deep bass
WOW : Setting for sound field with
3-dimensional feel
SURROUND LEVEL:
This is only valid for SRS WOW mode.
It adjusts the level of broadness
of the sound.
MIN MAX
SURROUND
LEVEL
TruBass
WOW
This function has a SRS WOW circuit that lets you enjoy deep bass and a
three-dimensional sound field regardless of the sound source.
In order to reproduce a powerful surround sound, this unit’s surround circuit emphasizes
the bass and middle frequencies. Therefore, for some sound sources (the music or video
software), the sound is distorted when the surround mode is switched on. If this happens,
adjust the volume control of the connected AV equipment and the headphones to a
distortion-free level.
The HA-W1000RF uses surround technology developed by SRS Labs, Inc.
of the United States.
●
TruBass mode: Technology that electrically applies the deep bass reproduction
technique of pipe organs to reproduce bass without an equalizer
●
WOW mode: A single circuit that combines three of the following technologies:
SRS for a natural 3-dimensional field for stereo signals, Focus technology to
move the sound image vertically and clarifies the contours of voices and musical
instruments, and TruBass technology explained above.
is a trademark of SRS Labs,
Inc.
WOW technology is incorporated
under license from SRS Labs, Inc.
Note: Surround sound cannot be
reproduced when the source signal is
monaural.
FOCUS
Hypothetical speaker
L
Hypothetical speaker
R
FOCUS
SRS
SRS
TruBass
SRS WOW image diagram
HOW TO USE
Within approx. 23 ft (7 m)
MAX. MIN.
VOL.
M
I
N
P
O
W
E
R
/
C
H
A
R
G
E
W
O
W
O
F
F
S
U
R
R
O
U
N
D
L
E
V
E
L
M
A
X
T
r
u
B
a
s
s
6. Adjust the volume control of the connected AV equipment and the
headphones, and set them to the desired listening level.
At the same time, adjust the ear pad angle to make it fit comfortably.
In case of interference or too much noise
(e.g. when used near a cordless phone or
any other transmission device), set the
transmitter’s CHANNEL to a different
position. To re-tune the headphone,
remove once and wear again.
Tips for better use
For improved sound quality, set the volume level of the connected equipment as high as
possible without causing distortion, while setting volume level of the headphones to a
slightly lower level. In surround mode, have the mode turned on while making the
adjustments as surround mode tend to distort more than normal mode.
To set optimum signal reception, adjustments
should be done within a range of approx. 23ft.
(7 m) between the transmitter and the
headphones.
After use
The power turns off by removing the headphone from head. When sound signal is not
received for two minutes, the transmitter is set to turn off automatically. Recharge the
headphone after use.
Notes:
1. When using the headphones, don’t raise the volume excessively. Continuous listening
for a long time at high volumes may damage your hearing.
2. For safety reasons, do not use the headphones while riding a bicycle or driving a
motorcycle, car, etc.
3. If the headphone is not used for a prolonged time, unplug the AC adaptor from an AC
outlet.
21
CHANNEL
21
CHANNEL