Filter
Top Products
16
HOW TO USE
Within approx. 23 ft (7 m)
MAX. MIN.
VOL.
M
I
N
P
O
W
E
R
/
C
H
A
R
G
E
W
O
W
O
F
F
S
U
R
R
O
U
N
D
L
E
V
E
L
M
A
X
T
r
u
B
a
s
s
6. Adjust the volume control of the connected AV equipment and the head-
phones, and set them to the desired listening level.
At the same time, adjust the ear pad angle to make it fit comfortably.
In case of interference or too much noise
(e.g. when used near a cordless phone or any
other transmission device), set the transmitter’s
CHANNEL to a different position. To re-tune
the headphone, remove once and wear again.
Tips for better use
For improved sound quality, set the volume level of the connected equipment as high as
possible without causing distortion, while setting volume level of the headphones to a
slightly lower level. In surround mode, have the mode turned on while making the adjust-
ments as surround mode tend to distort more than normal mode.
To set optimum signal
reception, adjustments
should be done within
a range of approx.
23ft. (7 m) between the
transmitter and the
headphones.
After use
21
CHANNEL
21
CHANNEL
The headphone is designed to automatically turn off when removed from your head, however auto
power-off may not activate in certain situations. In such cases, confirm that the power indicator light is
off by manually shortening the headband to its minimal length.
The power turns off by removing the headphone from head. When sound signal is not
received for two minutes, the transmitter is set to turn off automatically. Recharge the
headphone after use.
Notes:
1. When using the headphones, don’t raise the volume excessively. Continuous listening
for a long time at high volumes may damage your hearing.
2. For safety reasons, do not use the headphones while riding a bicycle or driving a
motorcycle, car, etc.
3. If the headphone is not used for a prolonged time, unplug the AC adaptor from an AC
outlet.
ins_ha_w1000rf_jc.qxd 10/3/2003 13:31 Page 2