Filter
Top Products
15
ENGLISH
HOW TO USE
M
I
N
P
O
W
E
R
/
C
H
A
R
G
E
W
O
W
O
F
F
S
U
R
R
O
U
N
D
L
E
V
E
L
M
A
X
T
r
u
B
a
s
s
V
O
L
V
O
L
1. Connect the transmitter and AV equipment. (Refer to page 10)
2. Connect the AC adaptor to the transmitter, then plug the AC adaptor into an
AC outlet. (Refer to page 11)
3. Turn on the power on the transmitter and the connected AV equipment.
Transmitter power
When an audio signal is input, the transmitter’s power is turned on automatically, and the
indicator lights in green. Also, when no audio signal is input for about a minute, the indica-
tor goes out automatically and the power turns off. (Automatic Power On/Off function)
The Automatic Power On/Off function is activated from audio on the left channel. The func-
tion may not activate properly in situations when the audio signal is detected only from the
right channel.
In some situations, the power may not be turned on automatically by the input sound
(e.g. a song with a quiet opening or gradual fade-in). This is not a malfunction.
4. To avoid excessive volume, first set the headphones’ volume to a low level
and fit them to the head to automatically turn on the power. Turn the receiv-
er power on after confirming transmitter’s power on.
5. When the power goes on, tuning begins automatically. Tuning may take
few seconds and sound is not heard during this procedure. This is not
a malfunction.
Before using the headphones for the first time, charge the rechargeable battery.
If Auto Tuning does not activate on the first attempt, remove the headphone, turn the power off,
and place it back on your head to reattempt the auto-tuning reception process.
ins_ha_w1000rf_jc.qxd 10/3/2003 13:31 Page 1