Filter
Top Products
12
Basic Operations and Settings
Press repeatedly.
• Each time you press , the brightness of the
front panel changes as follows:
NOTE
• Pressing also cancels the dimmer.
• You cannot turn off the illumination color even
though the dimmer is activated.
• While the dimmer is deactivated, the illumination
color for the source buttons lights in or flashes as
follows:
– While turning up the volume, the source
buttons light in red.
– While turning down the volume, the source
buttons light in blue.
– When pressing a source button, the selected
illumination color flashes three times.
– While a disc is paused, the source buttons
light in yellow and the yellow light flashes three
times.
The System is turned off (on standby)
automatically with the Auto Standby function
activated.
While any source other than FM or AM is
selected...
Press .
• "A.STANDBY SET" appears on the display
window.
The A.STANDBY indicator starts flashing in the
following cases:
• While CD is selected as the source and the disc
is stopped.
• While LINE is selected as the source and the
Digital Audio Player is stopped or the sound
signal from the Digital Audio Player is too weak.
The System will be turned off automatically if no
operation is done for about 3 minutes while the
indicator is flashing.
• "A.STANDBY OFF" starts flashing for 20 seconds
before the System is turned off.
■ To cancel the Auto Standby function
Press again.
"A.STANDBY CANCEL" appears on the display
window and the A.STANDBY indicator goes off.
NOTE
• Leaving the volume at "0" is not the same as
producing no sound, and therefore does not start
the Auto Standby function.
Changing the Display
Brightness (DIMMER)
: Dims the display.
: Dims the display more
than DIMMER 1 and
the front panel lights
blue.
: Only the source
buttons light.
: Cancels the dimmer
(initial setting).
Auto Standby
A.STANDBY indicator
UX-QX3W_A[A].book Page 12 Friday, July 21, 2006 4:37 PM