Filter
Top Products
10
Basic Operations and Settings
NOTE
• Before adjusting, set the sound mode to "SOUND
MODE NORMAL" ( page 9). When the sound
mode is set to any item other than "SOUND MODE
NORMAL" and you press , "NO OPERATE"
appears on the display window and you cannot
adjust the tone.
1 Press repeatedly to display
"BASS" or "TREBLE."
2
While "BASS" or "TREBLE" is
displayed on the display window,
press repeatedly to adjust the
tone.
• You can adjust the tone level within the
range of –5 to +5.
• The display returns to the source display in
a few seconds.
NOTE
• This function does not affect recording sound.
α Sound
α (alpha) waves are regarded as one type of
brain wave that is emitted when a person is
relaxed. JVC's
α SOUND function is designed
to produce natural and comfortable sound that
makes you feel relaxed. The natural effect is
completed by
1) modulation which adds fluctuation with the
α wave frequency to subtracted waves
(left-right indirect sound).
2) sound correction for covering the middle
range of waves in music signals which
naturally tend to dissipate.
Press repeatedly.
• Each time you press , the display changes
as follows:
• When α sound is set to an item other than
"α SOUND OFF," lights on the display
window.
NOTE
• When the SOUND MODE is activated ( page
9), using
α SOUND cancels the SOUND MODE
automatically and vice versa.
• This function does not affect recording sound.
Adjusting the Tone
: Adjusts the bass sound.
: Adjusts the treble sound.
α
Sound
: Produces a natural
sound.
: Produces a comfortable
sound.
: Produces a deeper
sound.
: Cancels α sound (initial
setting).
UX-QX3W_A[A].book Page 10 Friday, July 21, 2006 4:37 PM