JVC GET0201-001A CD Player User Manual


 
8
ENGLISH
To drop the volume in a moment
Press briefly while listening to any
source. ATT starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
If you turn the control dial, you can also restore
the sound.
To turn off the power
Press and hold for more than one
second.
If you turn off the power while listening to a
disc, disc play will start from where playback
has been stopped previously, next time you
turn on the power.
Canceling the display
demonstration
When shipped from the factory, display
demonstration has been activated, and starts
automatically when no operations are done for
about 20 seconds.
It is recommended to cancel the display
demonstration before you use the unit for the
first time.
To cancel the display demonstration, follow
the procedure below:
1
Press and hold SEL (select) for more
than 2 seconds so that one of the
PSM items appears on the display.
(PSM: see pages 36 and 37.)
The next-step-operation buttons
start flashing.
2
Press number button 1 to select
“MOVIE”—Movie category of the
PSM settings.
The Graphics setting screen appears on
the display.
3
Select “Off.”
4
Finish the setting.
To activate the display demonstration, repeat
the same procedure and select All Demo or Int
Demo in step
3
.
For more details, see To show the graphics on
the displayGraphics on page 38.
EN07-09_KD-AR3000LH300[J]f.p65 20/11/03, 4:14 PM8