JVC GET0201-001A CD Player User Manual


 
47
ENGLISH
When the current disc is a CD:
Playback starts from the first track of the
current disc.
Notes:
When you press CD/CD-CH LINE (for KD-AR3000)
or CD/CD-CH (for KD-LH300), the power
automatically comes on. You do not have to press
to turn on the power.
If you change the source, CD changer play also
stops. Next time you select “CD-CH” as the source,
disc play starts from where playback has been
stopped previously.
To change the display pattern
By pressing D DISP, you can change the
information shown on the display.
Each time you press the button,
the display patterns change.
For details, see page 23.
Selected disc number
Press ¢ briefly during
play, to skip ahead to the
beginning of the next track.
Each time you press the
button consecutively, the
beginning of the next tracks
is located and played back.
To go to a particular disc directly
Press the number button corresponding to the
disc number to start its playback (while the CD
changer is playing).
To select a disc number from 01 06:
Press 1 (7) 6 (12) briefly.
To select a disc number from 07 12:
Press and hold 1 (7) 6 (12) for more than
one second.
To fast-forward or reverse the track
Note:
During this operation on an MP3 disc, you can only
hear intermittent sounds. (The elapsed playing time
also changes intermittently on the display.)
To go to the next or previous tracks
Press and hold ¢ ,
during play, to fast-forward
the track.
Press and hold 4 , during play, to reverse
the track.
Press 4 briefly during play, to skip back to
the beginning of the current track.
Each time you press the button consecutively,
the beginning of the previous tracks is located
and played back.
Current track and elapsed playing time
EN46-51_KD-AR3000LH300[J]f.p65 20/11/03, 4:12 PM47