JBL SDP-40HD Home Theater System User Manual


 
SDP-40HD Setup
3-55
VOLUME CONTROL SETUP (continued)
REC PWR ON LAST LVL, -80 to +6dB
Sets the Record Zone volume level for the output connector labeled
Var to the selected value when the Record Zone is activated. When
LAST LVL is selected, the SDP-40HD sets the Record Zone volume
level to the last volume level that was selected in the Record Zone
during the previous operating session.
When the Record Zone Var audio output connector is connected to
a recording device, set the volume to +0dB to achieve appropriate
recording levels. Adjusting the Record Zone volume level will affect
the recording.
MAX VOLUME -80 to +6dB
Limits the volume to the MAX VOLUME parameter value if you
attempt to adjust the volume above that level.
SETUP VOLUME CONTROLS REC PWR ON
SETUP VOLUME CONTROLS MAX VOLUME