Filter
Top Products
Mode Adjust JBL
5-24
DECODING
The DTS and DTS-ES listening modes are designed for, at a
minimum, playback of 5.1-channel DTS, 5.1-channel matrix
encoded DTS-ES, and 6.1-channel discrete encoded DTS-ES
sources.
DTS and DTS-ES listening mode names differ depending on the
encoding present in the input source, the DECODING parameter
setting, and the speaker setup.
DTS-ES listening modes are available when DTS-ES decoding is
activated. The table at the bottom of the page shows the conditions
for the behavior of DTS-ES decoding when it is activated.
• DTS-ES decoding is activated when both the side and rear
speakers are present, the ES DECODING parameter is set to ON
or AUTO, and a 5.1-channel matrix encoded source is detected.
• DTS-ES Discrete decoding is activated when both the side and
rear speakers are present, the ES DECODING parameter is set to
ON or AUTO, and a 6.1-channel discrete encoded DTS-ES
source is detected.
• DTS-ES and DTS(-ES) Discrete decoding is deactivated when
the ES DECODING parameter is set to OFF or when the ES
DECODING parameter is set to AUTO and a 5.1-channel DTS
source is detected.
Note:
The table below is not applicable to the DTS-ES THX, DTS THX UL2Cin,
and DTS THX MUSIC listening modes.
Input Source
Parameter Setting
5.1-Channel DTS
5.1-Channel
Matrix Encoded DTS-ES
6.1-Channel
Discrete-Encoded DTS-ES
ES DECODING: AUTO
DTS DTS-ES DTS-ES Discr
ES DECODING: ON
DTS-ES DTS-ES DTS-ES Discr
ES DECODING: OFF
DTS DTS DTS