JBL SDP-40HD Home Theater System User Manual


 
SDP-40HD Mode Adjust
5-3
PREFERRED LISTENING MODE SELECTION
PARAMETERS
You can select four preferred listening modes for each Main Zone
input, including one listening mode each for 2-channel, Dolby
Digital, DTS(-ES), and 5.1-channel sources. The table below
indicates the INPUT SETUP menu parameters that can be used to
select preferred listening modes.
Preferred listening modes can be preselected so that when a
particular type of input source is played, the preselected listening
mode is activated on the selected input. For example, the DVD1 and
CD INPUT SETUP menu preferred listening mode selection
parameters are set as shown at the top of the next column.
If the DVD1 input is selected and a 2-channel source is
present, the L7 FILM listening mode is activated. If a Dolby
Digital source is played, the 5.1 L7 FILM listening mode is
activated.
If the CD input is selected while a Dolby Digital source is
present, the 5.1 L7 MUSIC listening mode is activated. If the
DVD1 input is then selected to play a DTS(-ES) source, the DTS
or DTS(-ES) L7 FILM listening mode is activated.
Note:
Refer to the Selecting Preferred Listening Modes section that begins on
page 3-13 for more information.
Preferred Listening Mode Selection Parameters
2-CH Selects a preferred listening mode for 2-channel
sources
D
Selects a preferred listening mode for Dolby Digital
sources
Selects a preferred listening mode for DTS-(ES)
sources
5.1mc Selects a preferred listening mode for 5.1-channel
sources
CD INPUT SETUP
NAME CD
HDMI IN NONE
DIGITAL IN COAX-2
ANALOG IN NONE
ANLG IN LVL +0dB
VIDEO IN NONE
COMPONENT IN NONE
2-CH MUSIC
D5.1 MUSIC
MUSIC
5.1mc 5.1mc FILM
MAIN ADVANCED
ZONE2 IN DIGITAL
RECORD IN DIGITAL
RECORD ADVANCED
DVD1 INPUT SETUP
NAME DVD1
HDMI IN 1
DIGITAL IN HDMI
ANALOG IN NONE
ANLG IN LVL +0dB
VIDEO IN NONE
COMPONENT IN 1
2-CH FILM
D5.1 FILM
FILM
5.1mc 5.1mc FILM
MAIN ADVANCED
ZONE2 IN DMIX
RECORD IN DMIX
RECORD ADVANCED