Filter
Top Products
Module name = ACS R2 Stereo Reverb
Descripon = Stereo reverb designed to be placed last in the chain to give ambience or width to
the sound, with adjustable pre-delay and room size. Three lters can be programmed to shape
the character of the wet signal. This reverb is thicker than the Reverb R1; it also has dierent
default lter parame ters.
Module name = Ph2 Phaser
Descripon = Phasing works by mixing the original signal with one that is phase shied. This
phaser features a feed back and width control for stereo eects.
Module name = SCH-1B Noise gate
Descripon = A noise gate is a simple way to get rid of noise in the signal. The tradional way this
eect works is by lowering the volume of the signal when the signal itself becomes very weak.
The SCH-1B is dierent in two ways. First, this noise gate does not operate on a closed-only or
open-only basis, but is variable. Sec ond, SCH-1B does not aect the actual “volume” but connu-
ously changes the lter param eters of an intelligent lter circuit. You may noce that the noise
gate is half-closed when playing soly. Compared to tradional noise gates this has the eect of
being perfectly responsive. The noise gate has four separate bands, and the fourth has an adjust-
able frequency.
29