Insignia NS-HD3113 Stereo System User Manual


 
9
Insignia NS-HD3113 HD Radio Shelf System with iPod Dock
www.insignia-products.com
3 Press STANDBY/ON to turn on your shelf
system. iPOD appears on the display, and
the iPod starts playback.
Connecting an external audio device
You can connect an external audio device, such
as an MP3 player, to your shelf system to play
sound from the device through your shelf system
speakers.
To connect an external audio device:
1 Make sure that your shelf system is turned
off.
2 Connect one end of an audio cable (not
included) to the LINE OUT jack on the
external audio device, then connect the other
end of the cable to the AUX IN jack on the
front of your shelf system.
3 Press STANDBY/ON to turn on your shelf
system.
4 Press AUX on the remote control to select
the auxiliary input from the device. Sound
from the external device is played through
your shelf system speakers.
Using your shelf system
Before using your shelf system, make sure all
connections are good, then plug the AC power
cord into an AC power outlet.
Turning your shelf system on and off
To turn on your shelf system:
1 Press STANDBY/ON . Your shelf system
turns on and starts playback in the last
selected play mode.
2 Press STANDBY/ON
again to switch your
shelf system to standby mode.
Selecting the play mode
To select the play mode:
CD/DVD—Press CD/DVD on the remote
control, or press INPUT on the shelf system
repeatedly until CD/DVD is shown on the
display.
•AM/FM—Press AM/FM on the remote
control, or press INPUT on the shelf system
repeatedly until AM/FM is shown on the
display.
AUX—Press AUX on the remote control, or
press INPUT on the shelf system repeatedly
until AUX is shown on the display.
iPOD
®
—Press IPOD on the remote control,
or press INPUT on the shelf system until
IPOD is shown on the display.
Adjusting the volume
To adjust the volume:
Press VOL+ or VOL– to increase or decrease
the volume. VOLUME and the current volume
setting appear on the display.
Press MUTE to turn off the sound. Press
MUTE, VOL+, or VOL– to turn the sound
back on.
Playing a CD or DVD
To play a CD or DVD:
1 Turn on your shelf system.
2 Press CD/DVD on the remote control.
3 Press
EJECT to open the disc tray.
4 Place a CD or DVD in the disc tray, with the
label facing up, then press
EJECT again
to close the disc tray.
The disc starts playback automatically.
Controlling CD/DVD playback
To control CD/DVD playback:
Press PLAY/PAUSE on the remote control or
the shelf system to start or pause playback.
Press NEXT or PREVIOUS to go to
the next or previous track (CD) or chapter
(DVD).
Press the F.FWD or F.RWD to search
forward or backward on the disc. Pressing
the button repeatedly changes the speed
(2X, 4X, 8X, 16X, 32X, play).
Press SLOW to play the disc in slow motion.
Press repeatedly to slow to 1/2, 1/4, 1/8, or
1/16 speed.
• Press STOP once to stop playback. The
shelf system memorizes the stop point and
when playback is resumed, it starts from that
point. During playback, if you press STOP
twice, it starts from the beginning of the disc.
Press REPEAT one or more times to select a
repeat mode. You can select:
•DVD—Chapter, Title, All
•CD—Track, All
MP3, JPEG, and so on—Single, Repeat
One, Repeat Folder, Folder
Press REPEAT A-B to repeat a section of the
disc.
Press REPEAT A-B at the beginning of
the section you want repeated.
Press REPEAT A-B again at the end of
the section you want repeated. The
selected section is automatically
repeated.
Press REPEAT A-B again to cancel.
Selecting playback options
To go directly to a specific title:
1 While a DVD is playing, press TITLE to show
a list of titles on the DVD (if available).
2 Press , , , or to select a title, then press
PLAY/ENTER to start playback from that title.
To go directly to a specific track (CD only):
1 While a disc is playing, press the number
buttons on the remote control of the track you
want to play. For example, to go to track 16,
press number 1, then press number 6.
2 Press PLAY/ENTER to start playback from
the selected track.