Insignia NS-HD3113 Stereo System User Manual


 
12
Insignia NS-HD3113 HD Radio Shelf System with iPod Dock
www.insignia-products.com
Adjusting the bass and treble
To adjust the bass and treble:
1 Press TONE to select the bass or treble
adjusting mode.
2 Press Up/Right direction buttons to increase
volume or the Down/Left direction buttons to
decrease volume.
Using the setup menus
Changing DVD settings
To access the DVD Setup menu:
1 Turn on your shelf system, then press
SETUP. The
DVD Setup
menu opens.
2 Press or to select an option, then press
PLAY/ENTER to open the sub-menu for that
option. Options include the following:
Changing audio settings
To access the Audio Setup menu:
1 Turn on your shelf system, then press
SETUP. The
DVD Setup
menu opens.
2 Press or to highlight the AUDIO icon,
press or to select an option, then press
PLAY/ENTER to open the sub-menu for that
option. Options include the following:
Changing video settings
To access the Video Setup menu:
1 Turn on your shelf system, then press
SETUP. The
DVD Setup
menu opens.
2 Press or to highlight the VIDEO icon,
press or to select an option, then press
PLAY/ENTER to open the sub-menu for that
option. Options include the following:
Option Description Settings
TV Display
Lets you change the
aspect ratio of the
video output
4:3 PS, 4:3LB, and 16:9
Angle
Mark
Enables an angle
mark to be displayed
on the screen when
a DVD has multiple
angles available
ON or OFF
OSD
Language
Lets you set the
language for screen
displays and setup
menus
English, French, and
Spanish
Close
Caption
Enables closed
captions to be
displayed when
playing DVDs
ON or OFF
Screen
Saver
Enables a screen
saver to be
displayed when
playback is complete
or in Pause mode
ON or OFF
Last
Memory
Enables the player to
remember where a
DVD was stopped
(when STOP is
pressed once)
ON or OFF
GENERAL SETUP PAGE
TV DISPLAY
ANGLE MARK
OSD LANGUAGE
CLOSECAPTION
SCREEN SAVER
ENG
OFF
GO TO GENERAL SETUP PAGE
OFF
LASTMEMORY
4:3PS
ON
OFF
X
Option Description Settings
Digital
Audio Setup
Lets you set the
digital audio output
mode of the player
SPDIF/RAW– Use this
setting when playing DOLBY
or MPEG discs to enable
digital output on the optical
or coaxial digital jacks. The
connected amplifier must be
able to decode Dolby Digital
or MPEG.
SPDIF/PCM– Use this
setting when the player is
connected to a 2-channel
digital stereo amplifier.
Dolby-
Dynamic
Lets you set the
Dolby Digital audio
output mode of the
player
Dynamic
Reverb
mode
Lets you set the
reverb mode
Concert, Living room, Hall,
Bathroom, Cave, Arena, or
Church
Option Description Settings
Video
Output
Lets you set the
video output mode
Composite or Component
TV Mode
Lets you set the
video scan mode for
video output
Progressive or Interlaced
X
DIGITAL AUDIO SETUP
DOLBY-DYNAMIC
REVERB MODE OFF
VIDEO OUTPUT COMP.
TV MODE
COLOR SETTING
X