Filter
Top Products
Copyright ©2005 by ILY Enterprise Inc.
All Rights Reserved.
26
Use arrow button to change the
setting. Then press ENT or ESC to return to the
12-01 menu.
4.12.2 Overburn
This setting lets you decide whether to copy beyond the limit of the CD or not.
Press ENT button to enter Overburn.
Use arrow button to change the
setting. Then press ENT or ESC to return to the
12-02 menu.
4.12.3 Read Error Skip
This function allows you to neglect any error that occurs during copying. You can use this function
to copy some defective CDs.
Press ENT button to enter Read Error Skip.
Use arrow button to change the
setting. Then press ENT or ESC to go
back to the 12-03 menu.
4.12.4 Format Hard Disk
This function allows you to partition the hard drive.
Press ENT button to enter Format HDD.
Use arrow button to change the
setting. Then press ENT or ESC to go
back to the 12-04 menu.
If the system does not connect with hard drive,
the LCD will show the message as follows:
4.12.5 Verify HDD
This function is to verify if the hard disc or any of its partitions are working well.
Press ENT to enter Verify HDD.
UnderRun Protect
On
12-02. Adv Setup
Overburn
Overburn
On
12-03. Adv Setup
Read Error Skip
Read Error Skip
Off
12-04. Adv Setup
Format HDD
All data will be
lost, format? Yes
There is no HDD!
12-05. Adv Setup
Verify HDD