Filter
Top Products
Copyright ©2005 by ILY Enterprise Inc.
All Rights Reserved.
19
button to make “Yes” or “No” selection.
16
If “Yes” is selected, the source disc will be automatically
ejected. Insert another disc.
Follow the steps to select the track that you want
to edit. Then press ENT button.
When the track selection is made, use arrow button
to move to the “End” manual.
Press ENT button to finish disc editing. Use arrow button
to make a selection.
The track will be loaded as an image file onto hard drive.
LCD will the following information.
When loading is finished, the LCD will
show the message as follows:
System will ask you whether you want to continue editing.
Use arrow button to make a selection. Select
“No” to go next step.
System will ask you if you want to burn from the HDD onto
CD-R/RW or move into a partition. Selecting “Burn” will
start the process.
LCD will show the copying information as follows:
When burning is finished, the LCD will show
the message as follows:
Selecting “Move” will move the data from the hard
drive template to a certain partition.
Select the partition that the data will move into by
pressing the arrow.
LCD will show the moving information as follows:
When moving is finished, the LCD will show
the message as follows:
If the chosen partition contains image data,
system will ask to overwrite it. Select “No” to
Continue edit
next Disc?Yes
Insert next disc
Select Track
:
+2/10 04:25
Select Track
:
End 2Trk07:50
End edit disc
and burn?Yes
Load- P0 -24X Edit
1/10 - > 2/2
Image load OK
Continue edit
next Disc?No
Burn or Move to
Partition?Burn
Copy- P0 -24X 0%
1/2 Trk03
:
25
Burn Complete !
OK: 03
Burn or Move to
partition? Move
Select Partition
A
Moving to P: A
0%
Moving to P: A
OK!