Filter
Top Products
Copyright ©2005 by ILY Enterprise Inc.
All Rights Reserved.
16
If comparison fails, LCD will show the number of discs
failed and succeeded.
Press ENT to see the comparison
information.
If the comparison fails, the LCD will show
the reason as follows:
4.9.5 Select Partition
This function is to select a partition in the hard disc.
Press ENT button to change the setting.
After installing a hard disc, duplicator will format it automatically. Each partition occupies 1GB.
The number of partitions is dependent on the hard disc’s capacity. The partitions are
alphabetically arranged.
Use arrow button to select which partition will
be worked.
When the partition is set, the LCD will show the
following:
4.9.6 Select Src Drive
This function selects CD-ROM or any CD writer as the source from which you can load data into
a particular partition as an image file.
Press ENT and arrow button to select
the source.
Then use arrow button to select the disc as the master
source.
After selecting the source, press ENT.
LCD will show the source information the following info:
4.10 Edit Track
Compare OK
:
0
Fail: 1 Diff: 0
Src
:
01 CD-ROM
Total: 0 Bytes
Src
:
02 CD-RW
TOC not match
9
-
05
.
Image P
:
A
Select Image
Select Working
Partition - A
Set Partition to
A
9
-
06
.
Image P
:
A
Image Src Drive
Select Img Src
:
01 IDE0 CD-ROM
Load image from
Drive ID-01