Filter
Top Products
13
Listening to a non-docking iPod
®
or other portable audio devices
If you are using an iPod
®
without a docking port or other MP3 player or other portable audio device, you can
still play it through the iH26 via the Line-in Jack.
NOTE: To use the Line in Jack, make sure no iPod
®
is docked in the iH26.
1. Plug one end of the audio patchcord (included) into the headphone or line-out
jack on your device and the other end of the patchcord into the iH26 ¸ Line-
in Jack, located on the back of the unit.
2. Press the ᕢ iPod Button on the iH26 (or ƺ Play/Pause Button on the remote
control). The AU Icon will appear, indicating AUX playing mode.
3. Turn on and play your device.
4. Use the ᕦ Volume+ and ᕧ Volume – Button on the iH26 (or ƾ Volume+ and
ƿ Volume – Button on the remote control) to adjust the system volume. You
may need to adjust your device volume, too.
5. To turn off the unit, press the ᕣ Alarm Reset/Power Off Button (or ƻ Power
On/Off Button on the remote control). Please remember to turn off your device,
too.
CD player
iPod
®