Filter
Top Products
11
Setting Up the iH26
Setting Clock Time and Calendar
1. Press and hold the Clock Adj Button located on the back of the unit for 2 seconds until the display flashes.
Turn the Setting Knob until the current time is displayed. Remember to set the correct AM or PM (an icon
to the right of the time display is the PM indicator; there is no AM indicator).
2. Press the Clock Adj Button again to confirm clock setting. You should hear 1 beep indicating the clock time
is set.
3. The year display at the lower right will flash. Press the Clock Adj Button to accept the current setting, or
turn the Setting Knob until current year is displayed. Press the Clock Adj Button to confirm year setting.
You should hear 1 beep indicating the year is set.
4. The date display at the lower right will flash. Press the Clock Adj Button to accept the current setting, or
turn the the Setting Knob until current date is displayed. Press the Clock Adj Button to confirm date setting.
You should hear 2 beeps indicating the date is set and will exit Clock and Calendar setting mode.
Setting Alarm Time
1. Press and hold the ᕨ Alarm Set Button for 2 seconds until the display flashes. Turn the Setting Knob until
the desired alarm time is displayed. Remember to set the correct AM or PM (an icon to the right of the time
display is the PM indicator; there is no AM indicator).
2. Press the Wake-To Button to select the iPod
®,
radio or alarm buzzer to wake to. A corresponding Wake
Icon will light up for the selected Wake-To sound.
3. Press the ᕨ Alarm Set Button again to exit the setting mode. You should hear 2 beeps indicating the alarm
time and wake to mode are set.
Note: Once you set the alarm time, the alarm will be automatically armed. The Alarm Icon and Wake Icon will
appear to indicate the alarm is armed.
Note: Make sure to adjust volume level for comfortable wake up volume.