12
Listening to a non-docking iPod
®
or other portable audio devices
If you are using an iPod
®
without a docking port or other MP3 player or other portable audio device, you can
still play it through the iH26 via the Line-in Jack.
NOTE: To use the Line in Jack, make sure no iPod
®
is docked in the iH26.
1. Plug one end of the audio patchcord (included) into the headphone or line-out jack on your device and the
other end of the patchcord into the iH26 ¸ Line-in Jack, located on the back of the unit.
2. Press the ᕢ iPod Play/Pause Button on the iH26 (or ƺ Play/Pause Button on the remote control). The
iPod Icon will appear, indicating ¸ Line-in Jack playing mode.
3. Turn on and play your device.
4. Use the ᕦ Volume
and ᕧ Volume Button on the iH26 (or ƾ Volume
and ƿ Volume Button on the remote control) to adjust the system volume.
You may need to adjust your device volume, too.
5. To turn off the unit, press the ᕣ Alarm Reset/Power Off Button (or ƻ Power
Off Button on the remote control). Please remember to turn off your device, too.
CD player
