Icom IC PCR100 Stereo Receiver User Manual


 
19
3
BASIC OPERATION
Automatic mode selection
An automatic mode function is available to automatically set
the receive mode, IF filter passband width and tuning step
after inputting a frequency.
Each click of the [AUT-M] button toggles the automatic mode
function on and off.
For the simple function receiver screen, the [AUT-M] button is on the
function controller screen.
DSetting the automatic mode function
The default setting for the automatic mode function can be
added to, changed or deleted. Up to 20 ranges can be mem-
orized into the automatic mode function settings.
q For the multi-function receiver screen, click the [SET] but-
ton to call up the setting screen.
For the simple function receiver screen, click the [MENU]
button and select the Function Setting (SET)to call up the
setting screen.
w Click the [Auto Mode] tab to display the automatic mode
list.
e Click a cell in the [Freq Low] column and the desired line.
r Input the lower frequency of the frequency range from the
keyboard, then push [Enter].
When nothing is input into the [Freq Low] or [Freq High] column,
settings for other columns cannot be made.
When inputting a new frequency, other data automatically ap-
pears in the other column.
To delete a frequency range setting, enter [0] or [Space] into the
[Freq Low] column from the keyboard.
t Input the higher frequency of the frequency range into the
[Freq High] column, push the [Enter] key.
y Set other data such as mode, tuning step, etc., if desired.
Double-click the desired cell, select the desired item and double-
click the selection.
u Click the close (["]) button to close the setting screen.
Click to bring up the
setting screen.