Filter
Top Products
34
Press a preset button (1-6) on the remote control briefly or click preset icon (1 -6) on the touch screen to
recall the stored station. You can also recall the stored station by pressing PREVIOUS/NEXT buttons on
the remote control.
Auto store/Preset scan
Auto store:
Pressing and holding the AS/PS button on the head unit or remote control, or pressing and holding the icon
on the touch screen to start auto store. The radio will scan radio station from the current frequency, and
automatically store the 6 strongest stations into the preset memories. When auto store is complete, the radio will
start preset scan of the stored 6 station.
Preset scan:
Press the AS/PS button on the head unit or remote control, or press the icon on the touch screen to scan
each preset station. If the field strength level is more than the threshold level, the radio will hold at this preset
station for 5 seconds with sound output, then go to next station until all 6 FM stations are scanned, finally the
radio will play at the preset station where scanning started. Press the AS/PS button again to stop preset scan.
STEREO/MONO
FM station is received in stereo mode. However, if the signal weak or reception is not as good as you would
like, switching to MONO mode usually improves the overall sound quality.
Press the MO/ST button on the remote control or click the icon on the touch screen to choose FM STEREO
or MONO audio effect.