Filter
Top Products
18
Dual zone
Pressing and holding SMART/MODE button on the RC, you can turn on or off the dual zone playing mode.
After turning on dual zone playing mode, press SMART/MODE button to select the playback mode for rear
zone: MEDIA => TV => AV1 => AV2.
Last Position Memory
During the media playback (DISC, USB, SD/MMC CARD), if you turn off the unit and then switch on it, the
unit will resume playing from the point that it was interrupted.
During the media playback (DISC, USB, SD/MMC CARD), if you switch to other mode, and then return the
previous mode again, the unit will resume playing from the point that it was interrupted.
Ejecting/Loading
Note: Before removing a disc from the disc slot, you should retract the TFT screen, otherwise, the loaded disc
can not be removed from the disc slot when you press the EJECT button.
Press EJECT button to flip down the panel, now you can load the disc.
Press EJECT button to flip down the panel. Press it one more time to eject the disc.
Note: The panel doesn’t move back in place after the disc is ejected; it will happen only after loading the disc
or after a second pressing of EJECT button.
To adjust the angle of TFT Screen
Poke at the TFT screen to adjust the gradient of the TFT screen, so as to achieve an optimal viewing angle.
System Information Display
In media playback mode, TV or auxiliary AV1/AV2 input mode, press the DISP button on the remote control,
the TFT screen will show such kind of system information, such as real time, volume level, current playback
mode of rear zone etc.