Hitachi VT-FX611A Home Theater System User Manual


 
Advanced Operations
This section explains how to use the VCR's remote control to operate your TV. It
also shows you how to hook up a cable box and how to connect a stereo or a
second VCR for a complete home entertainment system.
Compatibility
The remote control is designed to be compatible with many televisions, but will
not work with every one made. If your TV does not respond the way it should
when you program it as explained below, this remote may be incapable of
operating it.
Once you have programmed the remote, you won't have to do it again until you
change the batteries.
This Hitachi remote control can be used with your TV as well as the VCR, as long
as your TV comes with a remote control. This feature comes in handy - you don't
have to juggle two remotes.
The remote control is compatible with the fifteen makers of TV's listed below - but
don't be alarmed if yours is not on our list. You may still be able to program the
remote for your TV.
Every TV that comes with a remote control is set up to detect certain infrared
signals. You need to program the VCR's remote control to send signals that your
TV will recognize and respond to. Here's what to do:
Programming the Remote Control
Turn the television on (any channel is okay).
Aim the VCR's remote control at your TV set. Hold down the TV button (not the
VCP,/TV button) while you press the number corresponding to your brand of
television as shown in the chart (page 45).
For example, if you have an RCA television, press TV and 0 at the same time. If
this button combination sends a signal that matches with your TV, the channel
will change on the TV, and you'll know the remote is set to control the television.
If that button combination does not change the TV channel, go through the
whole list of button combinations one by one until you find the one that does
change your TV channel.
Also, if your brand of TV is not listed in the chart, try all the number buttons. One
of them may work for you.
If the TV channel still doesn't change after going through all the button
combinations listed, it is likely that you will not be able to program this remote
control for your TV.
TV Brands Press TV and This Number
38