Filter
Top Products
Basic'Operation S (PlaYback)
If you press the DISPLAY button when viewing a videocassette, the display, as
shown, appears for several seconds so you can see the functions of the number
buttons on the remote control.
4: SLOW 6: F ADV
The above functions always work when you are viewing a videocassette even if
the display, as shown, is not displayed.
Frame Advance
While in PAUSE mode during playback, press 6 button to view the video one
frame at a time. Press PAUSE to resume play.
Skip Playback
While playing back your tape you can skip forward by pressing the 6 button. The
tape will search ahead for about a minute and then resume playing.
Slow Motion
To slow the playback speed, press PLAY then press 4 button.
Use the CHANNEL up or down button to minimize any visual noise bands on the
screen.
After 1 minute in slow motion playback, the VCR will stop the tape automatically
to prevent damage to the tape and the VCR.
To return to playback at a normal speed, press PLAY. To stop the tape, press
STOP.
Viewing the On-Screen Display
Switching between the Clock, Time Counter and Time of Remaining Tape
Press DISPLAY while the on-screen display is displayed. The on-screen display
switches in the order below together with the VCR's display.
On-Screen Display Examples
Displaying the Time Counter
The time counter keeps track of how many hours, minutes and seconds the tape
has run.
Press DISPLAY. The time counter will appear on the TV screen and in the
VCR's display.
The linear time counter operates only if there is something recorded on the tape.
The counter changes to 0:00:00 when the tape is ejected.
30