Filter
Top Products
2-6
Mini Controller User’s Manual
Rate
The <
rate
> key allows access to the Rate at which the controller advances steps
within every program. There are three sets of Rate parameters: Incremental,
Program Functions, Function Advance.
Incremental
There are 99 Incremental parameters for Rate. These parameters are annotated on
the display by
1
through
99
, with
1
being the slowest Rate and
99
being the
fastest Rate.
Program Function
Following the Incremental parameters, there are seven Program Function
parameters. Refer to Table 1.2 and the Addendum for the result of each Program
Function.
Function Advance
The last Rate parameter is Function Advance. Function Advance is annotated by
FA
on the display. When this parameter is selected a Program Function (
F1
–
F7
)
is used at random or a Rate of
99
is used fifty percent of the time.
Table 2.3: Rate Program Functions
Program
Function
Manipulation of Rate
F1
Ramp down
F2
Ramp up
F3
Ramp up and down
F4
Fast for two programs , then
slow for one programs
F5
Fast for twelve steps, then slow
for four steps
F6
One step fast, next step slow
F7
Small pause every five steps