Filter
Top Products
2.3 Parts and their functions
The key functions differ depending on the unit's function and its mode. For details, refer
to the descriptions of the operations outlined in each section.
2.3.1 VA-1809 front panel
VA
1809
3
1
10
4
5
6
7
2
8
9
11
12
13
14
15
16
17
Fig. Front panel
No Button Description of function
1
CF card slot
This is where the CF cards are inserted. Before removing a CF card, be
absolutely sure to turn off the power.
2
LCD screen
The HDMI input images, analysis results, etc. are displayed on this
screen.
3
ANALYZE button Analysis is initiated by pressing this button.
4
RUN/STOP button
When this button is pressed while the input status is being updated, the
status is stopped on the screen (LCD, VGA) output. When it is pressed
again, the input status is updated.
5
PROGRAM button The contents of programs can be edited by pressing this button.
6
SAVE The settings or analysis results can be stored by pressing this key.
7
SETUP Various settings can be performed by pressing this key.
8
F1, F2, F3, F4 Settings or programs can be selected by pressing these function buttons.
9
SHIFT
The functions of the function keys can be extended by pressing these
keys together with the shift key.
10
HOTPLUG The HotplugDetect signal can be changed by pressing this key.
11
LOG A log of the input statuses can be displayed by pressing this key.
12
MENU The menus can be turned on or off by pressing this key.
13
ENTER Settings can be selected and entered by pressing this key.
14
ESC Settings can be exited by pressing this key.
4