Filter
Top Products
Repeat A-B
The CDR 30 may be programmed to repeat any
section within a track, or a complete passage
that includes material from a series of consecu-
tive tracks.
To program the unit for A-B Repeat play, first
play the disc and locate the point where you
wish to begin the repeated section.At the start
point, press the A-B Repeat Button p and
note that the Repeat Mode Indicator B
will show an A and flash. Let the disc play until
the point at which the section to be repeated
will end.At that end point, press the A-B
Repeat Button p again and note that the
Repeat-Status Indicator B will stop flash-
ing and will light showing Repeat A-B.
The unit will immediately begin to play the
section you have programmed, and continually
repeat it.
Notes on Program Play:
• The program material selected for A-B repeat
must be at least 4 seconds long.
• The repeat A-B feature does not function when
an MP3 disc is playing.
To resume normal play, press the A-B Repeat
Button p.The Repeat A-B Indicators B
will go out, and the disc will continue playing
through to the end. Stopping the disc or open-
ing the disc drawer will automatically cancel
the Repeat A-B programming.
Random Play
The CDR 30 may be programmed to play all the
tracks on any disc in random order, playing each
track until the entire disc has been played.
To playback the tracks in a random sequence,
press the Random Play Button k, making
certain that you have first pressed the CDP d
or CDR Select Button z , as appropriate,
so that the random command will be accepted
by the proper deck. Once the Random Play
Button k is pressed, the CDR 30’s internal
processor will select the tracks to be played in
random order and play through the disc.
If one of the Next Track Buttons wÛ˝
is pressed during Random Play, the unit will
move to the next randomly selected track, not
the next track in numerical sequence.
To stop a Random Play sequence, simply press
the Stop Button for the deck in play uÓ .
A Random Play sequence is also stopped when
a disc drawer is opened by pressing one of the
Open/Close Buttons c`6$.
Intro Scan Play
Intro Scan Play is a feature of the CDR 30
that allows you to quickly sample the contents
of a disc by automatically playing the first
10 seconds of each track.
To begin Intro Scan Play, press the Intro Scan
Button s for the deck containing the disc
you wish to hear.The deck will automatically go
into the Play mode, and will play the first 10
seconds of each track on the disc in sequence.
To hear the entire contents of a track while it
is playing in the Intro Scan mode, press the Play
Button j( for the appropriate deck.
20 PROGRAM PLAY
Program Play