Filter
Top Products
P ERFORMANCE SPECIFICATIONS
P7000
Power Rating: FTC (20Hz-20kHz, <0.1% THD) EIA (1kHz, 0.1% THD)
350 wpc into 8Ω 375 wpc into 8Ω
500 wpc into 4Ω* 525 wpc into 4Ω*
1000 wpc into 8Ω* 1050 wpc into 8Ω*
*Continuous sine wave power limited by current rating of line fuse.
Signal-to-Noise: 100dB below rated output from 20Hz to 20kHz
Frequency Response: ±0.1dB, 20Hz to 20kHz
+0/–3dB, 0.2Hz to 100kHz
Slew Rate: 100 V/µs
Input Impedance: 47,000Ω per phase
Input Sensitivity Range for rated output power:
Unbalanced: 1.7V-9.5V RMS (8Ω), 1.4V-8V RMS (4Ω)
Balanced: 0.85V-4.75 RMS (8Ω), 0.7V-4V RMS (4Ω)
Gain: +15dB min. / +30 max.
CMRR: –75dB at 1kHz
Damping Factor: 600 (to 1kHz); 200 (to 10kHz); 25 (to 100kHz)
Power Consumption: 275 VA quiescent.
1440 VA with both channels driven at 350 watts at 8Ω, 1800 VA maximum.
Controls & Switches: Front Panel: Power switch, Normal/Bridged mode switch, level controls
Rear Panel: Chassis/Float ground switch, Stereo/Bi-amp selector switch
Crossover: Variable high-pass, low-pass and bandpass; 100Hz as supplied
Indicators: Power lamp, Clip, Short, Thermal, Signal LEDs
Connectors: Input: 2-way XLR and 1/4" Tip Ring Sleeve
Output: 5-way binding posts spaced for dual banana plugs
Power: IEC 320
Dimensions: 19"W x 12
7
⁄8"D x 3
1
⁄2"H plus 1
1
⁄8" for handles, includes rear supports
(48.3cm x 32.7cm x 8.3cm plus 2.875cm for handles, includes rear supports)
Net Weight: 40 lbs. (18.18kg)
– ii –