Filter
Top Products
26
Switching on and off
1 Switch on the home cinema system from standby by pressing
»9« on the remote control or »ON/OFF« on the device.
– DVD receiver display: briefly »WELCOME«.
– The system switches on with the most recently selected input
source.
2 Switch the home cinema system to standby by pressing »9«
on the remote control or »ON/OFF« on the device.
– Display: briefly »GOOD-BYE«, the display on the DVD receiv-
er goes out.
Selecting the input source
1 Select the input source (DVD, TUNER FM/AM, AUX) by press-
ing »FUNCTION« on the DVD receiver or »DVD«, »AM
FM« or »AUX« on the remote control.
– Display on the DVD receiver: »DVD«, »TUNER FM«/»TUNER
AM«, »AV IN«, »SCART IN« or »DIGITAL IN«.
Preparing for disc playback
1 Switch on the television and select the preset channel for the
DVD receiver.
2 Switch on the DVD receiver from standby by pressing »9« on
the remote control or »ON/OFF« on the device.
3 Select the DISC input source.
– Display on the DVD receiver: briefly »DVD«, followed by
»LOADING« and then »NO DISC«.
Inserting a disc
1 Press »ə«.
– The disc compartment opens.
– Display on the DVD receiver: »OPEN«.
2 Insert the disc in the disc compartment with its label facing
upwards.
3 Press »
ə«.
– The disc compartment closes again (display: »CLOSE«).
The disc is scanned.
– Display on the DVD receiver: information on the disc.
GENERAL FUNCTIONS________________________
WELCOME
GOOD-BYE
DVD
NO DISC
CLOSE
OPEN
26