Filter
Top Products
ENGLISH
25
3 Press »M« on the remote control to select the memory function.
– Display: »SAVE TO
--
«, »
--
« for the preset position.
Note:
If no button is pressed within 5 seconds, the DVD receiver auto-
matically quits the memory function.
4 Select the preset position by pressing »
5« or »6« on the
remote control.
Note:
You can enter the preset position directly using the numerical
keys »1 ... 0« on the remote control.
5 Store the radio station by pressing »OK« on the remote control
within five seconds.
– Display: briefly »SAVED«, then for example
»FM03100.60
MHz«.
Restoring all default settings
You can return all settings to their default values with this function.
1 In the set-up menu, select »Rating« by pressing »
a
« or »
s
«
and then press »OK« to confirm.
2 Select »Load Factory« with »
A
« or »
S
« and then press
»OK« to confirm.
– All the default settings are restored.
Resetting the DVD receiver
In the unlikely event of the electronic controls of the DVD receiver
becoming blocked (for example due to static electricity from the car-
pet or because of electrical storms), you can reset the device to its
original state.
1 Use a pointed object such as a paper clip to press »RESET« (on
the back of the device) for two seconds
or
pull out the mains plugs and plug it back in after two minutes.
SETTINGS ______________________________________________
FM03 100.60 MHz
SAVE TO 03
SAVE TO
--
Language
Password – – – –
DD
Rating 7.
Load Factory
Reset
Video Audio Rating