Filter
Top Products
ENGLISH
19
Setting the loudspeaker configuration
Switching on
1 Switch on the DVD receiver from standby by pressing »9« on
the remote control or »ON/OFF« on the device.
Setting the distance to the listening position
Ideally, all the speakers in a home cinema system, should be set up
at equal distances from the listener. The central speaker should also
be positioned in line with the front speakers. If these preconditions
are met, you do not need to set a time delay for the sound, because
the default setting is »0ms«.
However, central and front loudspeakers are often set up closer to
the listener. In this case, the sound must be electronically delayed by
a fraction of a second. This is done using the sound time delay func-
tion.
If the central speaker is no more than 50 cm from the line between
the front speakers, the setting is not necessary. If the distance is
greater, you must find out the difference between the distances from
the listener to the front speakers and from the listener to the central
speaker. Enter the travel time of the sound in milliseconds (ms)
(»0ms« to »5ms«). One metre roughly corresponds to 3 milli-
seconds.
When using surround speakers, you must also find out the differ-
ence between the distances from the listener to the front speakers
and from the listener to the surround speakers. Enter the travel time
of the sound from »0ms«, »3ms« to »12ms«, »15ms«. One metre
roughly corresponds to 3 milliseconds.
1 Select the »Audio« menu item with »
a
« or »
s
« and press
»OK« to confirm.
2 Select »CNTR CTRL« with »
A
« or »
S
« and press »OK« to
confirm.
3 In the third column, press »
A
« or »
S
« to make the setting
and press »OK« to confirm.
4 Select »REAR CTRL« with »
A
« or »
S
« and press »OK« to
confirm.
5 In the third column, press »
A
« or »
S
« to make the setting
and press »OK« to confirm.
Checking the volume with a test tone
A test tone can be created for each connected speaker to check the
volume level. »Off« is the default value.
1 Select the »Sound« menu item with »
a
« or »
s
« and press
»OK« to confirm.
SETTINGS ______________________________________________
Language
AC3 PCM
DTS PCM 5ms
MP3/WMA PCM 4ms
Others PCM 3ms
Pink Noise Off 2ms
DRC Off 1ms
CNTR CTRL
0ms 0ms
REAR CTRL 0ms
Video Audio Rating