Filter
Top Products
20
SETTINGS ______________________________________________
2 Select »Pink noise« with »
A
« or »
S
« and press »OK« to con-
firm.
3 In the third column, select »On« with »
A
« or »
S
« and press
»OK« to confirm.
– The test tone sounds in turn from the left front speaker, the
central speaker, the right speaker, the surround speakers and
the subwoofer (see the loudspeaker indicator on the DVD
receiver).
4 Use »– z +« to adjust the volume of the test tone to a clear-
ly audible level.
– If you want to adjust the volume level of all the loudspeakers,
please read the section entitled “Setting the volume level on
all channels”.
5 To stop the test tone, press »
A
« or »
S
« to select »Off« in the
third column and press »OK« to confirm.
Setting the volume level on all channels
Depending on the current operating mode (see the loudspeaker
indicator on the DVD receiver), you can adjust the loudspeaker
volumes according to your preference. You can make this setting
either with or without the test tone. The volume impression should be
about the same for all channels. The individual volumes can be
adjusted within a range of -5 to +5 dB.
When entering the settings, if no button is pushed for more than
5 seconds, the DVD receiver quits the menu automatically. However,
altered settings are saved.
1 Press »SPK LEVEL« to open the menu for setting the level.
– Display: »SOUND«.
2 Press »
A
« to open the first setting.
– Display: e.g. »L-CH 0«.
3 Set the volume of the front speaker using »
a
« or »
s
«.
– Display: e.g. »L-CH +4«.
4 To set the central speaker (»C-CH 0«), the right front speaker
(»R-CH 0«), the surround speakers (»SL-CH 0« and »SR-CH
0«) or the subwoofer (»SW-CH 0«), repeat steps 2 and 3.
– The DVD receiver quits the menu automatically after five
seconds. All settings are retained.
SOUND
L-CH 0
L-CH +4
Language
AC3 PCM
DTS PCM
MP3/WMA PCM
Others PCM
Pink Noise
Off Off
DRC Off
On
CNTR CTRL 0ms
REAR CTRL 0ms
Video Audio Rating